Safety Gloves X-TOUCH CARBON ESD PU-Coated

Product information

• Type: Protective gloves
• Material: Polyester
• Coating: Polyurethane
• Colour: Grey / white
• Sizes: 7, 8, 9, 10
• Manufacturer: PROCERA Sp. z o.o., Częstochowa, Poland

Standards and certification

• Standards according to the marking: EN 388:2016+A1:2018, EN ISO 21420:2020 4131X
• EN 388 4131X: abrasion level 4, cut (coup test) level 1, tear level 3, puncture level 1, cut protection according to ISO 13997: not tested
• PPE category: II according to Regulation (EU) 2016/425
• Notified body according to the user manual: INTERTEK Italia S.p.A, Via Guido Miglioli 2/A, 20063 Cernusco sul Naviglio, Milano (MI), ITALY (no. 2575)

Use and limitations

The gloves protect the hands against mechanical injuries and the user against risks during manufacturing, assembly, reloading, inspection and other work, including abrasions, skin injuries and cuts, and against minimal risks such as dirt and objects with a temperature of up to 50 °C.

• Must not be used in high-risk situations, including where category II protection is not sufficient.
• Must not be worn where there is a risk of the gloves getting caught in moving machine parts, and are not intended for contact with fire.
• Protect only the parts of the hand that the glove covers. The protection level applies to the glove as a whole and only to new, undamaged and unrepaired gloves.
• Check before and during use that the gloves are intact and free of cracks, holes or damaged seams. Carry out a risk assessment of the working environment before use.
• Must not be washed or treated with preservatives, disinfectants or chemicals. Clean with a cloth or soft brush and dry at room temperature.
• Store dry and ventilated, protected from extreme weather, dirt, mechanical damage and chemicals.
• Service life: two years from the date of purchase when stored according to the manufacturer's conditions.
• Every material in the gloves can be an allergen. Consult a doctor before use in case of sensitivity or allergy.

Documents

• User manual and product information (PDF)

The information is taken from the manufacturer's documents.